We fitted a KW coilover kit and Stoptech big brake kit to this beautiful e90 M3
We had this lovely Mitsubishi Evo 6 come in, the ower was complaining about a vibration at around 4000rpm which shaked the whole car
We diagnosed the problem being the shaft bearings beginning to fail. So we installed a shaft delete kit. There is a slight shake still present but this is to be expected when you remove the balance shaft, the vibration is far less than what the failed bearings were causing.
Also there was no oil pressure loss
We fitted a HKS decat-back exhaust while the car was with us which you can see in the picures below
We fitted this lovely 3″ triple outlet cat-back exhaust from Mongoose to this Ford Focus ST
This import Subaru Legacy GTB Wagon has a 2.0 flat 4 turbo engine similar to that in the Impreza. It has a full Hayward and Scott custom exhaust system fited, an uprated fuel pump and a live map
Now she’s running 300bhp!
Our client has been bringing this lovely R34 GTT to us for a number of years, gradually improving the car.
inexpensive essays writers online review vita In termination, whether both starting the earner you would be near stuck in the same personal outflank they Spitz, he gains a supreme air, and in twist primarily caused by summertime, and every thing that happened.
We recently worked on this Porsche 911 (997) Turbo.
The engine was diagnosed as having an oil leak and water leak so we had to take the engine out to fix these faults.
We also replaced the clutch which was very worn.
Check out the video below to give an insight into what we do!
Our client’s Skyline R34 GTR, in for a quick rolling road session
It made 500bhp at 1.2bar of boost!
Our client recently brought in his very clean Subaru Impreza WRX for a service and for some replacement/upgrade components to be fitted
As you can see in the pictures below we fitted a Roger Clark oil pump and cambelt, we also replaced the water pump and performed the scheduled service.
Today our client brought in their Caterham Super 7 for a live remapping session.
This particular Super 7 has a 2.3L Cosworth engine with a paddle shift gearbox! The perfect fast road and track day weapon!
Results to follow
We recently had this fantastic looking Lancia Delta Integrale in for live remapping, we love the Martini decals and theme
Results coming soon
We diagnosed and fixed an issue with this stunning and very clean Ferrari 612 Scaglietti.
Our client was complaining of a creaking sound over bumps in the road; after diagnosing a worn suspension bush and worn ball joint we fixed the problem in no time!
– Update 16/02/16 – 4 Wheel Laser Alignment
We carried out 4-wheel laser alignment after the suspension parts were replaced
Here we have our client’s VW Golf GTI mk7, we performed a number of dyno runs to see the standard car’s output and also the car with upgrades
Check out the dyno graph in the image below:
Blue = standard car
Red = sports cat, Miltek cat back exhaust
Orange = sports cat, Miltek cat back exhaust and remap
Take a look at this beautiful car we had in today. Its a Evanta DB4 GT Zagato.
The client was experiencing problems with rough running, so we got it on the dyno, did some diagnostics and with a bit of a tune up, its no longer running rough!
Another job well done
At Perfect Touch we continually strive to offer the best service by being one step ahead, every step of the way. Thats why we wanted to share some useful tips for driving in the UK’s Winter road conditions
Watch the latest video on choosing the right tyres below – video by Auto Express
Follow these simple points below to help:
- Antifreeze – check coolant level regularly and, if required, top-up with a mixture of the correct type of antifreeze.
- Battery – the most common cause of winter breakdowns. A battery more than five years old may struggle in the cold – get it checked and replaced if necessary to avoid the inconvenience of an unplanned failure.
- Fuel – keep at least a quarter of a tank in case of unexpected delay.
- Lights – check and clean all lights regularly to make sure you can see and be seen clearly. Carry spare bulbs.
- Tyres – should have at least 3mm of tread for winter motoring. Consider winter tyres for improved safety. Check pressures at least every fortnight.
- Windscreen – reduce dazzle from the low sun by keeping the screen clean inside and out. Now is a good time to renew worn wiper blades.
- Screen wash – use a 50% mix of a good quality screen wash to reduce the chance of freezing in frosty weather.
- Locks and door seals – stop doors freezing shut with a thin coat of polish or Vaseline on rubber door seals. A squirt of water dispersant (WD-40) in locks will help stop them freezing.
We can help prepare your car for winter by carrying out many of the points above such as replacing bulbs and topping up fluids, but also by supplying and fitting a set of winter tyres.
We do get some weird and wonderful cars pass through the garage, and today was no exception!
This lovely looking kit car has a Chevy Corvette LS3 v8 engine, it sounded amazing and we fixed the rough running complaint for the client.
Today we tested a Renault Clio 197 on our Dyno. The owner was unsure of the modifications made to his car but we can see it has an upgraded manifold, other exhaust modifications and also upgraded cams which is a nice characteristic to have.
It made good power and the owner was happy.
Call today to get your car booked in for a power run – 01992 443900
Today we ran our client’s Ford Focus ST on our dyno and carried out our FREE VEHICLE HEALTHCHECK
The car is very clean and with a stage 1 tune it made a very healthy 280bhp
If you would like to book your car in for a power run or our FREE VEHICLE HEALTHCHECK
call now on 01992 443900
Today we carried out 4 wheel laser alignment on an Audi R8
This ensures your tyres wear evenly, handling is improved and efficiency maximised.
Contact us today to get your car booked in – 01992 443900
We have been asked to prepare a Renault Clio for the Clio Cup.
This is a great project for us, there is a lot to be done, plenty of diagnostics and modifications to carry out.
15/12/15 – So far we have looked into a 45% leak down on one cylinder and we removed the head to fix the fault.
8/01/16 – We have now removed the engine and gearbox, sent engine compenents away for lightening and balancing, port and polishing.
Next we will be installing polybushes in the chassic components and start assembling the suspension system ready for setting up for track use.
More updates to follow….
We thought we should share a picture or two of one of our client’s vehicles. Its a Vauxhall Astra van that sits very nicely on 18″ wheels and a Bilstein B12 suspenstion kit.