Porsche 997 Engine Rebuild

The owner of this Porsche 911 came to see us after a recommendation. The previous garage had stripped down the engine and were unable to take on the task required.

As the engine was already stripped down we were able to immediately inspect the cylinder walls and determine the issue. The cylinder walls on the naturally aspirated Porsche engines are Nickel Sealed Aluminium and are known to suffer from cylinder pick-up. This is where as the piston is moving up and down inside the cylinder it makes enough contact to gradually strip away this Nickel Seal, leading to loss of compression.

After we spoke to the customer it was decided that to replace the cylinder block it would be worthwhile in fitting the existing cylinder block with brand new Steel Liners. This would ensure that in the future this enginer would never suffer the same issue.

Take a look at the pictures below to see some of what was involved

If you think your Porsche may be running rough, let us take a look – call today on 01992 443900

0

Posted:

Categories: Recent Work

Perfect Touch Performance Ltd

Perfect Touch Performance Ltd

Unit G Belcon Industrial Estate,
Bingley Road,
Hoddesdon,
Hertfordshire
EN11 0NX
01992 443900
 
Registered in England and Wales: 07786097
Registered in England for VAT: GB770746314
 
bosch_automotive_trainedtrust-my-garage-135which-trusted-trader-135Mobil-1-service-centre-135

Recent Posts

BMW X5M ECU Remap with fantastic results

This BMW X5M was brought into us for an ECU remap. These vehicles are simply awesome anyway so with

October 4, 2017 read more

Supercharged BMW e46 M3 – engine build (updated 24/09/17)

It's time this M3 had an engine to cope with the supercharger. The stock engine unfortunately suffe

September 24, 2017 read more
audi-80 bmw-80 jaguar-80 mercedes-benz-80 mitsubishi-evo-200 nissan-gtr-200 range-rover-80 subaru-impreza porsche-80